Legendary Chevrolet Corvette
"Speed Racer" and "Concept Car Design" on Honda Nova
Concept of this Honda Nova is "Speed Racer" and "Concept Car Design". This car body is made by hand with galvanized material thickness 0.6-0.8 meters. The design "classic speed racer cars" can seen in the numbers with black and white lines from the trunk until bonet with car number in the middle of bonet and body side.
Dodge Race-Ready 2010 Viper SRT10 ACR-X
Today, Dodge unveiled the third limited, special-edition version of the soon-to-be-discontinued Viper SRT10 sports car, dubbed ACR-X. Based largely upon the Viper SRT10 ACR, the new model is a turn-key, non-street legal, racer that's powered by a tweaked version of the standard Viper's 8.4-liter V10 that gains new headers and a low-restriction exhaust system, increasing output by 40HP to 640 horsepower.
The Viper SRT10 ACR-X's suspension has been upgraded and tuned specifically for track usage, while the sport car's weight is lightened by 160 pounds (73 kg) over the standard production model.
Dodge said that the car also features additional aerodynamic upgrades to improve downforce as well as to enhance stability and grip in high-speed cornering.
As a track racer, the Viper ACR-X comes with all the usual factory-installed safety equipment such as a factory-designed roll cage, fuel cell and race seat.
Dodge said that during a testing session of the ACR-X at Laguna Seca raceway last month, professional driver Kuno Wittmer from the SCCA Pro Racing SPEED World Challenge Touring Car Championship series, was able to run consistent 1:31.00 lap times around the 2.238-mile, 11-turn course.
This means that Wittmer's lap times were more than 3 seconds faster than the street-legal Viper SRT10 ACR which holds the production car track record at Laguna Seca raceway.
"The Dodge Viper ACR-X is incredible," said Wittmer. "After a short warm up, I was running lap times as quick as exotic GT race cars. I was blown away by the power and acceleration, and even more surprised at how the ACR-X navigated the challenging Laguna Seca corners and how friendly it was to drive at the limit."
The limited production 2010 Dodge Viper SRT10 ACR-X will go on sale in the States in Spring 2010 with prices starting from around $110,000.
Audi R8 Dione Sport Cars 2010
The exterior package includes: PPI Razor carbon fiber front grill, PPI Razor carbon fiber front lip, PPI Razor carbon fiber GTR wing and PPI Razor carbon fiber side skirts. And of course do not forget the amazing exterior paint: Matte Finish with Jet Blue Metallic. The car sits on 20" Volk Racing VRG2 wheels.
As for the car’s performances, SR Auto Group added a new RSC exhaust system, but they did not reveal if this will improve in any way the engine’s performances.
So, until now the tuner updated the R8 coupe version, in both V10 and V8 versions. We guess that next on their list is the Spyder version.
2010 Audi R8 Dione PicturesHyundai i20 Sport Cars Edition
The exterior package includes: body-colored front skirt and wheelarch flares to the exterior, while a glossy radiator grille mesh insert, black bezel headlights and daytime running lights are also introduced. The car’s sporty appearance is completed with the inclusion of a glossy B-pillar, smoked windows, dark red tinted rear lights and 17-inch Brabus alloy wheels with Yokohama tires.
On the interior the tuner added Orange leather Recaro seats, a black leather gearshift cover with orange-colored seams, a chrome gear shift knob, a leather-wrapped center console, leather-covered door panels, and a 7-inch touch screen navigation all bring added verve to the driving experience.
Dodge Challenger SRT8
Anyone who loves a finely tuned automobile should be in attendance at the upcoming SEMA Show. This particular show creates a tuning atmosphere that can be appreciated by just about anyone, but can be truly heavenly to the avid enthusiasts that look for ways to enhance a car’s styling, functionality, comfort, convenience, and safety. I may be difficult to choose a crowd favorite amidst the growing number of improved models, but one vehicle may just be our favorite so far. Meet the special Dodge Challenger SRT8 customized by CULT Energy Drink.
A feast for the eyes, this Challenger looks the part of an aggressively mean car prepared to take out anyone that may get in its way. One of the only details we know about the car is that it features a one-off, hand-fabricated wide body kit that provides some extra girth to the already masculine car. It also does not run on racing fuel.
We can’t imagine that a car that looks like this doesn’t carry an equally insane motor to push out astronomical power. It is rumored that this Challenger is carrying a 5.7L V8 HEMI with its intake manifold, clearly, popping out of the car’s hood. To say that we are excited to see the Cult’s newest project at this year’s SEMA show is as much of an understatement as we can possibly muster. This car is simply badass and it’s one that could be perfectly suited for a next generation Mad Max!
Tuning Cars 2012 Nissan GT-R facelift
So, what we can tell you is something you already now: the facelift GT-R will get a restyled front bumper that improves the GT-R’s aerodynamic performance from 0.272 to 0.268. A redesigned rear diffuser also improves the rear downforce with almost 10%. Also new for 2012, the Nissan GT-R gets two new exterior colors: Aurora Flare Blue Pearl (color code RAY) and Nebula Opal Black (color code GAG). Also, it is rumored that the GT-R will deliver a total of 500 HP.
The new GT-R will go on sale in 2011 and will be offered in all major markets: Europe, USA and Japan.
First Cosworth Impreza STI CS400 delivered
The car will deliver an impressive 400PS (395 hp) at 5750rpm and will make the 0 to 60 mph sprint in 3.7 seconds. This is an impressive task compared to the standard Impreza WRX STI at 300PS / 296bhp at 6,000rpm with a 5.2 second sprint.
"As a huge Impreza fan I’m thrilled to be the first to take delivery of the ultimate incarnation of the model line," enthused Edwards. "The CS400 is everything I’d hoped it’d be and more. The performance is simply astounding and to know I’m one of just 75 people in the world to own one… well, it’s a very special feeling.BMW Z4 GT3 Sporty Design
GT3 BMW Z4, which is officially launched and completed the first test drive in early March, already enjoying great popularity among customers of BMW Motorsport. The first cars delivered to private teams, BMW will prepare them for use in national and international championships.
“Information about the BMW Z4 GT3 very positive,” said BMW Motorsport Director Mario Theissen. ‘Round these sports cars in the range of our products, and provides drivers and teams a chance to compete at the championships in accordance with the GT3 regulations – such as the FIA GT3 European Championship, the International GT Open or Masters ADAC GT – and 24-hour endurance “Next., The GT2 BMW M3, BMW 320si WTCC, which is consistent with the rules Super2000, GT4 and close to the production of the BMW M3 are available for teams of clients around the world by BMW Motorsport distributions.
BMW Z4 production model is impressive: with a long hood, wheel arches are lit, the long wheelbase and narrow projection, this car offers a unique look. BMW Motorsport engineers two passengers provide a good basis to develop close to GT3 racing car production.
The biggest difference between production and racing cars is under the hood while the production version of the BMW Z4 is powered by a six-cylinder engine, GT3 car is powered by a 4.0 liter eight-cylinder engine similar to units used in the BMW M3 GT2. This strong liver produces more than 480 HP. Its excellent performance and good torque curve and the basic machinery for the production version of the BMW M3 is destined to be used in motorsport.
Installing a V8 engine has a large influence on the development of the BMW Z4 GT3. Initially, the design review area is done by CATIA V5 design to place the machine in an ideal position and meet the specifications of race. The engineers then add all other components.
When it comes to electronics, private teams can expect BMW’s innovative solutions, which have been tried and tested in the GT2 BMW M3: ECU408 support the management of modern machines, while ‘electronic control units responsible for Power400 control all the actuators. Power is transmitted via a six-speed sequential gearbox with Quick Shift “function.
Wheels with central locking and security clips are also included in the shipment. In addition, the BMW Z4 GT3 also offers driver assistance systems, such as ABS and traction control expenditure, adopted by another car in the race for the range of customers, and then developed and modified for use in a GT3 car.
Front axle GT3 BMW Z4 with a new design, based on a series of concepts. It is equipped with a tubular stabilizer bar with the bar adjusted. Rear axle is designed as a longitudinal axis of the connection, such as the standard version of the BMW Z4. Steel body car from the BMW factory in Regensburg. Tues security very rigid, precision steel tubes and then welded into the body. V8 engine blocks produced in the BMW foundry in Landshut. BMW plant in Dingolfing help the rear wheel differential and driveshaft, among others.
During its development, the BMW Motorsport engineers work hand in hand in other fields with their counterparts in the production. This allows them access to the calculation of the field of computational fluid dynamics (CFD) in the aerodynamic design of cars. In addition, tests are also conducted in wind tunnels and on test benches BMW Group.
Front and rear wings, hood, roof, fenders and other components made of carbon fiber reinforced plastic (CFRP). The use of lightweight material, resistant to play a lot of weight GT3 BMW Z4 until the 1200 kilograms.
Like all the cars on track racing BMW customers, emphasis is also placed on profitability during the development of the BMW Z4 GT3. As a result, the car offers an excellent cost / quality ratio and gives the team a chance to participate personally in the affordable sports car at the highest level.
Bugatti Veyron 16.4 Super Sport Racing Car
Bugatti Veyron 16.4 Super Sport set a new speed record for production cars: 431 km / h! All officially, all of the rules: in the presence of Germany’s technical inspection TUV and the Guinness Book factory pilot Pierre Henri Raphanel fulfilled races landfill Era-Lessin.
Arrivals were conducted in both directions, GPS showed 427, 933 km / h acceleration in one direction and 434, and 211 km / h in another. The end result is the arithmetic mean: 431 km / h. Bugatti engineers admitted that they are very satisfied with the alignment, as calculated by the number 425 km / h.
Engine Bugatti Veyron 16.4 Super Sport is increased to 1200 hp and maximum torque of 1500 Nm. The potential of the car have already demonstrated, but for cars on sale, the maximum speed limit at 415 km / h – more can not stand the tire.
In addition to the redesigned engine and chassis primarily for the sake of a safer pilot at high speeds: slightly increased the course of the suspension, installing more powerful stabilizers and shock absorbers for racing. Lateral acceleration Veyron Super Sport can reach 1.4G.
Luxgen7 SUV 2.2-litre Turbocharged
New Sport Citroën Metropolis – in China
Even if the luxury car market is still not large compared to the U.S. and Europe, it has a growth rate that allows the development curve points to very high numbers at the end of the decade. The car makers want to sell many “luxury” must therefore be present in China and have models that are tailored for the Chinese taste. While PSA Peugeot Citroen is well aware of this and you will not let the German colleagues to be alone on this lucrative market.
“The same design components to be used for a top model from Citroen to be developed in China,” said Gregoire Olivier to Automotive News China. However, he mentioned nothing about when this model would be ready and if it also is relevant for the European market.
Metropolis is the first concept car developed by the PSA’s own design studio in Shanghai and it was at the inauguration of the World Expo in the spring as it was unveiled. Citroën has not revealed all the details but the powertrain will consist of a two-liter gasoline V6 that provides 275 hp and 375 Nm, which indicates that Citroën makes use of turbocharging.
The transmission is a seven-speed dual clutch transmission. V6 driving the front wheels, while an electric motor at 40 kW/55 hp (quick “boost” effect 95 horses) drives the rear wheels. The system allows engines to work separately or together. Metropolis can run a few mil in city traffic completely emission free.
New Sport Bugatti to begin selling Veyron in India
Bugatti must be really confident in the buying power of the rich folks of India considering that the company has introduced the Veyron 16.4 Grand Sport in the country despite the ridiculous 110% import tax tacked to items like foreign exotic cars.
Add the car’s cost to the tax it comes with and to be able to purchase a Veyron in the country would mean that you would have to pay a staggering $3.6 million. Apparently, Bugatti is undeterred by the mammoth tax cars like the Veyron will be given, opting to focus more on the huge potential of the spending power of wealthy locals, which, according to analysts, could reach $14.7 billion as fast as 2015.
Satya Bagla, head of Exclusive Motors Pvt., the company that carries high-end brands Bugatti, Bentley, and Lamborghini, said that the Indian market, specifically the wealthy, are beginning to open up their bank accounts. “People have more spending power and are getting more aware of owning beautiful things,” she said.
New Sport Abarth Roadster
Hoping to leave behind the disappoint that was the Smart Roadster, Abarth’s new Roadster model will feature an all new design, a transverse, mid-engined layout similar to that of the Lotus Elise. There are previous suggest reports suggesting the future Abarth model will share the chassis with the KTM X-Bow, but that is still under discussion. The car’s exterior design will be inspired by Abarth models of the 1960s.
Under the hood there will be the recently launched turbocharged 1.4-liter MultiAir, available with outputs as high as 170bhp. The engine will be mated to a new six-speed, dual-clutch gearbox, but a seven-speed version is also a possibility for the future.
Expect the new Abarth Roadster to debut in 2012, priced at around £25,000 (aprox. $40,000 at the current exchange rates). Abarth expects to produce a total of 5,000 units to sell worldwide.
New Sport Nissan Juke 2011
In Europe we find a range of engines of 190 hp with 240 Nm of torque, 1.6-liter gasoline and a model 117 hp with 157 Nm and the same cylinder, in diesel engine there is a 1.5 liter dCi with 110 hp and 240 Nm of torque. In the United States currently offer only the variant of 190 hp turbo gasoline.
They have also included some pins between the wheels (of TRAK, you can see on the image side quite well) that reduces the distance between the tire and the body (or, more precisely, between the tire and fender area), reducing turbulence in the area and improving the performance also when riding fast. Logically, the downside is that it also significantly reduces off-road capability of the Juke.
New Sport Porsche Carrera GT
Porsche has since its inception by Ferdinand Porsche been a maker of high performance sports cars. Most notably the iconic 911 model which has continually evolved throughout the years to become a benchmark against which many other sports cars are measured. The 911 in all its iterations has been Porsche's bread and butter, along with the Boxster and Cayman in more recent years. Every decade or so however, Porsche brings something special out of it's factories. A supercar!
Porsche's first two supercars were produced to satisfy FIA homologation standards. This required that 200 road legal cars had to be made and sold to the public in order for the car to qualify for racing in FIA sanctioned races. The first car was the 959 which was introduced in 1986. Looking like a heavily modified 964, the 959 however was so much more. It sported a 2.8L twin-sequential-turbocharged flat-six engine that put out 444 HP. This was put to the ground with an innovative 4-wheel drive system. A first for Porsche, which worked so well, a similar system was later adapted for use on the 993 turbo, and has been a staple of Porsche's 911 turbo models ever since. In its day, the 959 was actually the fastest production car in the world, with a top speed of 200 mph and a 0-62 time of 3.7 sec. Impressive even today. The 959 continued in production through 1989.
The second Porsche supercar was the 911 GT1, which was based on a heavily modified 993 platform. Like the 959, it was produced and made available to the public for homologation purposes so that it could be raced by Porsche at Le Mans. The 911 GT1 was produced from 1996-1999. It has a water cooled twin-turbo flat-six engine that produced 700 bhp. With a 2400lb curb weight, the 911 GT1 was extremely fast. It had a 0-62 time of 3.3 seconds and a top speed of 235 mph.
In 1999, Porsche was looking to produce a new Le Mans racecar. It was originally slated to have a flat-six engine as their previous racers had. Later though, a 5.5L V10 engine was designed, however this delayed the project until 2000. The engine was then increased in displacement to 5.7L. Shortly afterward, the Le Mans project was canceled. At the same time, some of the Porsche management had been wanting to produce a new supercar for the public. Something that would bring Porsche a great deal of attention from the world. A new supercar was green lighted by management, with no restrictions that it share parts with any of their regular production cars. This freedom to build whatever they wanted opened the design team up to build a clean sheet car. Since the Le Mans project had been canceled, the newly designed V10 engine was waiting to be used in some way. It turned out to be just what the design team was looking for. With some tweaking to make it more driver friendly, Porsche now had a 5.7 Liter V10 that output 612 HP at 8400 rpm. This engine needed a car to propel still. A new carbon fiber composite chassis was designed, which was coupled with aluminum subframes. Carbon composite body panels were also crafted.
Instead of using an automated manual transmission with paddle shifting as was becoming popular in the supercar world, a six speed manual was decided upon to provide a more involved driving experience. However, it was desired by the design team to keep the engine mounted as low as possible in the middle of the car to lower the center of gravity, and thus better the handling of the car. To do so, the engineers designed the smallest clutch that's been used in production car, a 6 inch diameter twin plate carbon fiber clutch. The small size of the clutch gave it very low inertia, which let the engine rev very quickly. Some have said the clutch is tricky to get a hang of when first driving the car. It has been said however that the way to drive it is to first let the clutch out, then once rolling apply the throttle. Stalling should be a non-issue then. The Carrera GT for a while held the record time for a production car on the Nurburgring of 7:28, set by Porsche driver Walter Rorhl. The Carrera GT had a 0-62 speed of 3.9 seconds, and a top speed of 205 mph. It sold for a base sticker price of $440,000.